Sökresultat

The premise of massive multiple-input multiple-output (MIMO) is based around coherent transmission and detection. Majority of the vast literature on massive MIMO presents performance evaluations over simplified statistical propagation models. All such models are drop-based and do not ensure continuity of channel parameters. In this paper, we quantify the impact of spatially consistent (SC) models

With the potential to provide a clean break from massive multiple-input multiple-output, large intelligent surfaces (LISs) have recently received a thrust of research interest. Various proposals have been made in the literature to define the exact functionality of LISs, ranging from fully active to largely passive solutions. Nevertheless, almost all studies in the literature investigate the fundam

Partially Premixed Combustion (PPC) has shown to be a promising advanced combustion mode for future engines in terms of efficiency and emission levels. The combustion timing should be suitably phased to realize high efficiency. However, a simple constant model based predictive controller is not sufficient for controlling the combustion during transient operation. This article proposed one learning

In addition to a rise in mean air and water temperatures, more frequent and intense extreme climate events (such as heat waves) have been recorded around the globe during the past decades. These environmental changes are projected to intensify further in the future, and we still know little about how they will affect ecological processes driving harmful cyanobacterial bloom formation. Therefore, w

The response of evapotranspiration (ET) to warming is of critical importance to the water and carbon cycle of the boreal biome, a mosaic of land cover types dominated by forests and peatlands. The effect of warming-induced vapour pressure deficit (VPD) increases on boreal ET remains poorly understood because peatlands are not specifically represented as plant functional types in Earth system model

Propagation models constitute a fundamental building block of wireless communications research. Before we build and operate real systems, we must understand the science of radio propagation, and develop channel models that both reflect the important propagation processes and allow a fair comparison of different systems. In the past five decades, wireless systems have gone through five generations,

Radio based positioning or tracking solutions typically require wideband signals or phase coherent antennas. In this paper, we present a target tracking method based on received non-coherent signal strength differences (RSSDs) between antennas for outdoor Internet-of-things (IoT) scenarios. We introduce an RSSD model based on classical path-loss models. With known antenna patterns and antenna arra

Given a Boolean formula, the problem of counting seeks to estimate the number of solutions of F while the problem of uniform sampling seeks to sample solutions uniformly at random. Counting and uniform sampling are fundamental problems in computer science with a wide range of applications ranging from constrained random simulation, probabilistic inference to network reliability and beyond. The pas

Biogenic Volatile Organic Compounds (BVOCs) are trace gases other than CO2 and CH4 produced and emitted by the biosphere, where the amounts released depend on climatic factors such as temperature and solar irradiation. However, interpretation of leaf-level measurements is currently hampered by factors such as large within-genotypic variability, measurement height and time in the season. A campaign

Partially premixed combustion (PPC) is a low temperature, direct-injection combustion concept that has shown to give promising emission levels and efficiencies over a wide operating range. In this concept, high EGR ratios, high octane-number fuels and early injection timings are used to slow down the auto-ignition reactions and to enhance the fuel and are mixing before the start of combustion. A d

The computation power we expect from the various smart devices we use keeps increasing. Not only do we want faster devices but also less power hungry and energy efficient devices, both for the environment and our personal convenience (remember that "mobile phone" attached to a power plug at all times?).One way of addressing this demand is to build custom processor architectures that focus on a spe

Splatting photons onto primary view samples, rather than gathering from a photon acceleration structure, can be a more efficient approach to evaluating the photon-density estimate in interactive applications, where the number of photons is often low compared to the number of view samples. Most photon splatting approaches struggle with large photon radii or high resolutions due to overdraw and insu

A detailed understanding of the dynamic processes of vehicular radio channels is crucial for its realistic modeling. In this paper, we present multipath components (MPCs) tracking results from a channel sounder measurement with 1-GHz bandwidth at a carrier frequency of 5.7 GHz. We describe in detail the applied algorithms and perform a tracking performance evaluation based on artificial channels a

Realistic propagation modeling requires a detailed understanding and characterization of the radio channel properties. This paper is based on channel sounder measurements with 1 GHz bandwidth at a carrier frequency of 5.7 GHz and particular tracking methods. We present statistical models for the number of, birth rate, lifetime, excess delay and relative Doppler frequency of individual multipath co

Application of the faster than Nyquist signaling method to the upcoming fifth generation wireless system

Methods for energy and bandwidth efficient coded digital communication, including pulse design, non-orthogonal signaling methods, and the faster than Nyquist signaling method.

A survey of faster than Nyquist results over the last 15 years, with and extension of earlier binary modulation/convolutional coding results to four-level modulation.

Characteristic mode analysis has traditionally been constrained to problems which utilize only perfect electric conductors (PEC). Through forced symmetry of a method of moments surface integral equation and newly proposed post-processing, characteristic modes can be solved for any material in a computationally efficient manner. As an example, the characteristic modes are solved for a mobile termin