Filtyp
Background: Growth differentiation factor 15 (GDF-15) has been associated with the risk of developing major bleedings, including but not restricted to intracranial hemorrhages, in patients on oral anticoagulants or dual antiplatelet therapy. We hypothesized that there may be an association of GDF-15 with incidence of hemorrhagic strokes in the general population, which has not been investigated be
The auto-ignition caused by oblique shocks was investigated experimentally in a supersonic flow regime, with the incoming flow at a Mach number of 2.5. The transient characteristics of the auto-ignition caused by shock evolvements were recorded with a schlieren photography system, and the initial flame kernel generation and subsequent propagation were recorded using a high-speed camera. The fuel m
A respiratory virus emitted in an aerosol particle will experience a tough journey with many obstacles before finding a new host where it can cause an infection (Fig. 1). By every second, its chances to replicate decrease due to removal by building ventilation, deposition on surfaces, or loss in infectivity. Thus, the transport of infectious viruses from the exhaled breath of one person to the inh
The development of new modes at x-ray free electron lasers has inspired novel methods for studying fluctuations at different energies and timescales. For closely spaced x-ray pulses that can be varied on ultrafast time scales, we have constructed a pair of advanced instruments to conduct studies targeting quantum materials. We first describe a prototype instrument built to test the proof-of-princi
Path integration is a computational strategy that allows an animal to maintain an internal estimate of its position relative to a point of origin. Many species use path integration to navigate back to specific locations, typically their homes, after lengthy and convoluted excursions. Hymenopteran insects are impressive path integrators, directly returning to their hives after hundreds of meters of
Simulations and comparisons on the influence of internal coolant crossflow of a novel film cooling hole design, called “sister holes”, and a baseline cylindrical hole were performed with an established turbulence model. The results show that sister holes can provide better film cooling performance than the baseline case at three blowing ratios, and as the blowing ratio increases the sister holes s
The aim was to investigate associations between health locus of control (HLC) and all-cause, cardiovascular (CVD), cancer and other cause mortality. A public health postal questionnaire was distributed in the autumn of 2008 to a stratified random sample of the 18–80 year old adult population in Scania in southernmost Sweden. The participation rate was 54.1%, and 25,517 participants were included i
This research investigated convective heat transfer and hydraulic resistance of smooth and corrugated double-tube heat exchangers at various flow rates from 60 L/h to 200 L/h. The inner tube with a thread structure is designed with three pitches, i.e., 4 mm, 6 mm and 8 mm. Nanofluids are used as tube-side fluids to analyze the enhancement of heat transfer on the inner tube side. Results show that
This article focuses on the role of lay health promoters in the Lindängen initiative, a community-based participatory research (CBPR) programme for health promotion that started 2016 in a low-income neighbourhood in the outskirts of Malmö, southern Sweden. The programme aimed to support equitable health and develop an innovative model for community health promotion. The purpose of this article is
Air pollution is one of the leading causes of morbidity and mortality worldwide. Low-emission zones (LEZ) have been increasingly implemented in cities throughout Europe as a measure to reduce the adverse health effects and premature deaths associated with traffic-related air pollution. In the present study, a health impact analysis was conducted to estimate the effect of a hypothetical LEZ on mort
The internal heat exchangers of a vehicle in driving are excited by forced vibration due to road bumps. But the effect of this phenomenon on the thermal-hydraulic performance of the heat exchanger has not been systematically studied. To investigate the influence of this vibration on the heat transfer characteristics, a numerical model of the rectangular heat exchanger unit channel under vibration
The demand for fast and energy efficient (opto-)electronic applications needs high mobility semiconductor materials, such as InAs with a very high electron mobility and GaSb with a very high hole mobility. Beyond the material itself, also an innovative device geometry is needed, for example, the gate-all-around geometry that provides higher efficiency and electrostatic control for computational un
Novel rotating-cylinder sliding vane rotary compressors (RC-SVRCs) are promising machines in energy conversion systems due to extremely low friction. However, three-dimensional visual investigations on geometrical optimizations of RC-SVRCs are highly limited. Besides, most flow mechanisms and leakage flow affected by geometric structures have not been fully revealed yet. Therefore, the sliding van
Heat exchanger network synthesis is an essential optimisation tool for Process Integration, particularly in energy-intensive industries. Proper design or retrofit of heat exchanger network can enable energy conservation, efficiency improvement, and process debottlenecking. Many earlier pieces of research have focused on the impact of the network structure and process features such as network topol
In this work, a discontinuous airfoil fin printed circuit heat exchanger (PCHE) was used as a recuperator in a micro gas turbine system. The effects of the airfoil fin geometry parameters (arc height, maximum arc height position, and airfoil thickness) and the airfoil fin arrangements (horizontal and vertical spacings) on the PCHE channel’s thermo-hydraulic performance were extensively examined by
We investigate the impact of impurity configuration on electronic and optical properties of YVO4 through application of plane-wave DFT. Since this crystal is a common host material for optical devices and it has been widely used as a phosphor and a laser host material, it is important to identify a correlation between impurity location and the intrinsic properties of the material. To further impro
OBJECTIVE: Trigger finger (TF) is a hand disorder causing the fingers to painfully lock in flexion. Diabetes is a known risk factor; however, whether strict glycemic control effectively lowers risk of TF is unknown. Our aim was to examine whether high HbA1c was associated with increased risk of TF among individuals with diabetes.RESEARCH DESIGN AND METHODS: The Swedish National Diabetes Register (
The gas flow field design plays a vital role in the cell performance of proton exchange membrane fuel cells, especially at high current densities. In this study, wavy flow channels are designed and adopted on the cathode side to enhance the mass transport process. Results demonstrate that the wavy flow channels proposed in this paper significantly improve cell performance at high current densities
OBJECTIVE: Few studies address results from use of new technology and patient participation in hypertension management. The PERHIT Study is a multicentre randomised controlled trial with the aim to evaluate the effects of a person-centred approach using a web-based, interactive self-management system through the patient´s own mobile phone on blood-pressure and well-being. Primary aim is the degree
This thesis addresses how graphene can be a valuable asset for surface science studies. Using a combination of X- ray photoelectron spectroscopy, scanning tunneling microscopy, and low-energy electron diffraction, we take advantage of graphene’s sensitivity to changes in its chemical environment to obtain an atomic scale understanding of different reactions occurring above and below the film.As a
