Filtyp
The structural description of any particular member of the CeO2Y2O3 solid solution series reduces to the determination of compositional and displacement eigenvectors associated with two sets of modulation wave-vectors. The primary modulations are associated with oxygen (vacancy) ordering and the second-harmonic modulations with metal atom ordering —both with concomitant structural relaxation. Wit
Background: Multiple cardiac sarcoidosis (CS) diagnostic schemes have been published. Objectives: This study aims to evaluate the association of different CS diagnostic schemes with adverse outcomes. The diagnostic schemes evaluated were 1993, 2006, and 2017 Japanese criteria and the 2014 Heart Rhythm Society criteria. Methods: Data were collected from the Cardiac Sarcoidosis Consortium, an intern
Dual target magnetron sputtering has been used to grow single-crysal MoV superlattice structures (SLS) with modulation wavelengths λ ranging from 0.6 to 17.7 nm on (001) oriented MgO substrates held at temperatures Ts between 600 and 900°C. High resolution cross-sectional transmission electron microscopy (HRXTEM) images and comparisions between experimental and calculated X-ray diffraction (XRD)
A class of quasiperiodic superlattice structures, which can be generated by the concurrent inflation rule A→AmB and B→A (where m=positive integer), has been studied both theoretically and experimentally. Given that the ratios between the thicknesses of the two superlattice building blocks, A and B, are chosen to be γ(m)=[m+(m2+4)1/2]/2 (known as the ‘‘precious means’’), then the x-ray- and electro
Importance: Despite the large health burden, reliable data on sepsis epidemiology are lacking; studies using International Statistical Classification of Diseases and Related Health Problems (ICD)-coded hospital discharge diagnosis for sepsis identification suffer from limited sensitivity. Also, ICD data do not allow investigation of underlying pathogens and antimicrobial resistance. Objectives: To
Thin YBa2Cu3Ox films were grown on SrTiO3 or LaAlO3 single crystals by dc-magnetron reactive sputtering in argon/oxygen gas mixtures. Deposition temperatures ranged from 540 °C to 780 °C. After deposition and subsequent cool down, films grown above 680 °C are superconducting below 86–88 K. All films are oriented with the [001] direction parallel to the [001] substrate normal. The best films have c
Epitaxial TiN/NbN(001) superiattice thin films with periods A between 0 (alloy) and 9.6 nm have been grown by ultrahigh vacuum reactive magnetron sputter deposition on MgO(OOl) substrates in mixed Ar/N2 discharges. Cross-sectional transmission electron microscopy was used for characterizing layer and defect structure. Coherency strain relaxation close to the film/substrate interface resulted in no
Aims: An observational nationwide all-comers prospective register study to analyse outcomes after coronary artery bypass grafting (CABG) or percutaneous coronary intervention (PCI) in unprotected left main coronary artery (LMCA) disease. Methods and results: All patients undergoing coronary angiography in Sweden are registered in the Swedish Web-system for Enhancement and Development of Evidence-b
Background: Radiostereometric analysis (RSA) studies have shown that the continuous migration of tibial components is predictive of aseptic loosening following total knee arthroplasty (TKA). In the present study, we investigated whether accurate sizing and placement of tibial components are related to the degree of implant migration as measured with use of RSA.Methods:A total of 111 patients who u
Epitaxial (001)-oriented Mo/V superlattice films with wavelengths of ≈ 5 nm have been grown on MgO(001) substrates, kept at 700°C, by dual-target unbalanced magnetron sputter deposition in Ar discharges. Low-energy (15-250 eV) Ar ion irradiation with incident ion-to-metal flux ratio of ≈ 1 during film growth was obtained through the application of a negative potential Vs to the substrate. The effe
Two-dimensional (2D) buried delta-function-shaped Sb-doping profiles have been obtained in Si using a low-energy accelerated Sb-ion source during molecular-beam epitaxy. A combination of secondary-ion mass spectrometry (SIMS), capacitance-voltage (C-V) measurements, and cross-sectional transmission electron microscopy (XTEM) was used to investigate dopant distributions and to determine profile wid
Introduction: Recycling of domestic waste and a number of employees in the recycling industry is expected to increase. This study aims to quantify current exposure levels of inhalable dust, endotoxin, and microorganisms and to identify determinants of exposure among recycling workers. Methods: This cross-sectional study included 170 full-shift measurements from 88 production workers and 14 adminis
Semi-coherent Y2O3 (yttria) inclusions are identified in high quality epitaxial YBa2Cu3Ox (YBCO) thin films by using transmission electron microscopy and energy dispersive X-ray analyses. Magnetization measurements show enhanced flux pinning in films containing an increasing number density of inclusions. The inclusions are incorporated into the films without disturbing the YBCO structure appreciab
The precipitation behavior, especially the early nucleation stages, of the industrial strip-cast Al3003 alloys was investigated by using transmission electron microscopy (TEM). An icosahedral quasicrystalline phase was found as secondary particles in these strip-cast alloys after heat treatment for a few seconds. Three different nucleation paths are proposed based on the TEM observations. They hav
Pleural mesothelioma (PM) is an aggressive malignancy that develops in a unique tumor microenvironment (TME). However, cell models for studying the TME in PM are still limited. Here, we have generated and characterized novel human telomerase reverse transcriptase (hTERT)-transduced mesothelial cell and mesothelioma-associated fibroblast (Meso-CAF) models and investigated their impact on PM cell gr
Most proteins fold into characteristic three-dimensional structures. The rate of folding and unfolding varies widely and can be affected by variations in proteins. We developed a novel machine-learning-based method for the prediction of the folding rate effects of amino acid substitutions in two-state folding proteins. We collected a data set of experimentally defined folding rates for variants an
Cross-sectional transmission electron microscopy, including high resolution microscopy, was employed to characterize the interfaces between hydrogenated amorphous carbon (a-C:H) films and steel substrates. Films were deposited both by ion beam decomposition of large hydrocarbon molecules and by magnetron plasma decomposition of C2H2. The latter method was also used to deposit Mo- and W-containing
Tourmalines with different compositions show different plane group symmetries in experimental high resolution transmission electron microscopy (HRTEM) when projected along the c-axis. Fe-poor elbaite shows p31m symmetry, while Fe-bearing elbaite shows p3m1 symmetry. Rubellite shows p6 symmetry, while Fe-Mg-Al-bearing tourmaline shows a `pseudo' p6 type of symmetry. Symmetries p3m1 and p6 are not c
A higher critical current and enhanced pinning was obtained in c-axis-oriented YBa2Cu3O7−x (YBCO)films having a higher density of semicoherent yttria (Y2O3) inclusions. The films were grown by sputtering and the inclusion density depends on the fraction of N2O in the sputtering gas. The inclusions were studied by transmission electron microscopy, both in planar sections and in cross-sections. They
Cross-sectional transmission electron microscopy (XTEM), including high-resolution microscopy (HREM), was employed to characterize the interface between different amorphous hydrogenated carbon (a-C:H) films and steel substrates. Additional analyses using Auger electron spectroscopy (AES) and X-ray diffraction (XRD) were also performed. Films were deposited both by high-energy (50 keV) nitrogen ion
