Search results

This work provides a new method to enhance endwall heat transfer of a sharp turn channel. Several longitudinal vortex generators (LVGs) at various spacing and aspect ratio are placed in parallel on the inner side of endwall in a sharp turn channel. Liquid crystal thermography, pressure difference measurements, and a statistical method are applied to analyze the thermal behavior, friction factor, a

Atomic layer deposition (ALD) is an outstanding deposition technique to deposit highly conformal and uniform thin films with atomic precision. In particular, ALD of transition metal oxide layers from metal amido complexes and water finds its way in several technological fields, including green energy devices and in the semiconductor industry. These ALD reactions are believed to follow a reaction s

X-ray free-electron lasers (XFELs) provide high-brilliance pulses, which offer unique opportunities for coherent X-ray imaging techniques, such as in-line holography. One of the fundamental steps to process in-line holographic data is flat-field correction, which mitigates imaging artifacts and, in turn, enables phase reconstructions. However, conventional flat-field correction approaches cannot c

Objective: The aim of this study was to assess the cost effectiveness of oral semaglutide versus other oral glucose-lowering drugs for the management of type 2 diabetes (T2D) in Sweden. Methods: The Swedish Institute for Health Economics Diabetes Cohort Model was used to assess the cost effectiveness of oral semaglutide 14 mg versus empagliflozin 25 mg and oral semaglutide 14 mg versus sitagliptin

A feasible implementation of a novel X-ray detector for highly energetic X-ray photons with a large solid angle coverage, optimal for the detection of Compton X-ray scattered photons, is described. The device consists of a 20 cm-thick sensitive volume filled with xenon at atmospheric pressure. When the Compton-scattered photons interact with the xenon, the released photoelectrons create clouds of

BACKGROUND: A randomized controlled trial of the SMART4MD tablet application was conducted for persons with mild cognitive impairment (PwMCI) and their informal caregivers to improve or maintain quality of life.OBJECTIVE: The objective was to conduct economic evaluation of SMART4MD compared to standard care in Sweden from a healthcare provider perspective based on a 6-month follow-up period.METHOD

Small angle neutron scattering experiments have been carried out in the mixed state to determine the values and anisotropy of the penetration depth and coherence length in the superconductor β-PdBi2. The distortion of the vortex lattice observed on changing the magnetic field direction suggests that the a–c anisotropy of penetration depth in β-PdBi2 is small. With the magnetic field applied along

Background: Suicide in old age is a significant contributor to mortality. However, the extent to which life weariness and suicidal thoughts impact on mortality in a long-term perspective is unknown. The aim of this study was to investigate the effect of life weariness and suicidal thoughts on long-term survival (16 years) in an older Swedish population, controlling for demographic and social netwo

Background: Accurately quantifying the risk of osteoporotic fracture is important for directing appropriate clinical interventions. While skeletal measures such as heel quantitative speed of sound (SOS) and dual-energy X-ray absorptiometry bone mineral density are able to predict the risk of osteoporotic fracture, the utility of such measurements is subject to the availability of equipment and hum

The hot erosion of turbine tip and the maintenance of tip reliability and service times have always been great challenges for researchers. This work presents a novel design of a tip wall with the internal surface fitted with delta-winglet vortex generator pairs (DVGP). Various spacing of DVGP is considered to study the influence of spacing on the internal tip heat transfer and flow behavior in the

Liquid–liquid two-phase flow in microchannel is very common in micro-chemical and micro-biological system, etc. Deep understanding of the liquid–liquid two-phase flow mechanisms and mass transfer in microchannel can promote industrial applications significantly. To summarize the recent research progress on the liquid–liquid two-phase flow in microchannel, this paper collects research work about th

Heat transfer characteristics in a latticework duct with various sidewalls are numerically investigated. The crossing angle is 90 deg and the number of subchannels is eleven on both the pressure side and suction side for each latticework duct. The thickness of the ribs is 8 mm and the distance between adjacent ribs is 24 mm. The investigation is conducted for various Reynolds numbers (11,000 to 55

A numerical method was used to study the effect of the broken rib locations on the heat transfer and flow structure in the latticework duct with various rotational numbers. The latticework duct had eleven subchannels on both the pressure side and the suction side. The crossing angle for each subchannel was 45 deg. The numerical studies were conducted with five different broken rib locations and si

Traditional empirical formulas of Colburn heat transfer factors will lead to a design deviation for cryogenic heat exchangers. This paper employs the computational fluid dynamics (CFD) technique to numerically study the thermal performance of cryogenic compact heat exchangers (CCHEs). To obtain more precise convective heat transfer coefficients, the heat transfer performance of CCHE with serrated

Fouling on heat exchanger surfaces can weaken the heat-transfer capability, increase the energy consumption, and even cause the failure of the whole system. In coaxial heat exchangers, spirally corrugated tubes perform better than smooth ones concerning heat transfer and antifouling. In this article, a parametric study on the antifouling performance of a six-start spirally corrugated tube is carri

OBJECTIVE: Untreated perinatal HIV-1 infection is often associated with rapid disease progression in children with HIV (CWH), characterized by high viral loads and early mortality. TRIM22 is a host restriction factor, which directly inhibits HIV-1 transcription, and its genotype variation is associated with disease progression in adults. We tested the hypothesis that TRIM22 genotype is associated

Dicarbonyl compounds are highly reactive precursors of Advanced Glycation End-products (AGEs), produced endogenously, present in certain foods, and formed during food processing. AGEs contribute to development of adverse metabolic outcomes but health effects of dietary dicarbonyls are largely unexplored. We investigated associations between three dietary dicarbonyl compounds, methylglyoxal (MGO),