Filetype
There is a pressing need to capture and track subtle cognitive change at the preclinical stage of Alzheimer's disease (AD) rapidly, cost-effectively, and with high sensitivity. Concurrently, the landscape of digital cognitive assessment is rapidly evolving as technology advances, older adult tech-adoption increases, and external events (i.e., COVID-19) necessitate remote digital assessment. Here,
A reflective metasurface with reconfigurable beam is proposed for indoor wireless communications. It consists of 8 × 8 unit cells with tunable capacitors. By varying the capacitances, the reflective phase across the metasurface can be designed to facilitate different reflective angles for an incident wave. The simulation results show that the proposed reflective metasurface can deflect the incomin
Vehicle-to-everything (V2X) wireless communication is expected to play a key role in enabling complex Advanced Driving Assistance Applications, including the support of emerging autonomous vehicles. The development of V2X applications, especially safety-related, requires rigorous verification. Field trials, though, have to be supplemented with less expensive and more repeatable methods. Thorough V
Multi-carrier technique is a backbone for modern commercial networks. However, the performances of multi-carrier systems in general depend greatly on the qualities of acquired channel state information (CSI). In this paper, we propose a novel deep-learning based processing pipeline to estimate CSI for payload time-frequency resource elements. The proposed pipeline contains two cascaded subblocks,
This paper presents an analysis of channel characteristics for an outdoor scenario at the frequency band of 28-30 GHz. A geometry-based clustering algorithm is proposed to group the measured multipath components (MPCs) based on the interaction points on the surrounding walls or objects obtained from Ray Tracing 3-D simulations, which is more physically interpretable than the traditional clustering
Background: Prototyping is an established practice for user interface design and for requirements engineering within agile software development, even so there is a lack of theory on prototyping. Aims: The main research objective is to provide a means to categorise prototyping instances, in order to enable comparison and reflection of prototyping practices. Method: We have performed a systematic m
Large-scale software engineering is a collaborative effort where teams need to communicate to develop software products. Managers face the challenge of how to organise work to facilitate necessary communication between teams and individuals. This includes a range of decisions from distributing work over teams located in multiple buildings and sites, through work processes and tools for coordinatin
Current research on multi-antenna architectures is trending towards increasing the amount of antennas in the base stations (BSs) so as to increase the spectral efficiency. As a result, the interconnection bandwidth and computational complexity required to process the data using centralized architectures is becoming prohibitively high. Decentralized architectures can reduce these requirements by pr
The use of radio signal for position tracking (positioning) and navigation has a long tradition. Most notably, global navigation satellite systems (GNSS) are now widely applied for civilian applications, ranging all the way from tracking of cargo containers to gaming. However, GNSS suffers from limited coverage in dense urban areas and indoors and also from a limited position accuracy, which rules
We use the received bit information rate (RBIR) to analyze the performance of multi-layer transmission when combined with hybrid automatic repeat request (HARQ). The different layers are obtained from ordinary Gray-coded M-QAM and used for transmitting log2(M) codewords in parallel, exploiting that the different bits in Gray-coded M-QAM have very different reliability. The performance is analyzed
Stereo 3D video from surgical procedures can be highly valuable for medical education and improve clinical communication. But access to the operating room and the surgical field is restricted. It is a sterile environment, and the physical space is crowded with surgical staff and technical equipment. In this setting, unobscured capture and realistic reproduction of the surgical procedures are diffi
Cellular-connected unmanned aerial vehicles (UAVs) have recently attracted a surge of interest in both academia and industry. Understanding the air-to-ground (A2G) propagation channels is essential to enable reliable and/or high-throughput communications for UAVs and protect the ground user equipments (UEs). In this contribution, a recently conducted measurement campaign for the A2G channels is in
Power control is becoming increasingly essential for the fifth-generation (5G) and beyond systems. An example use-case, among others, is the unmanned-aerial-vehicle (UAV) communications where the nearly line-of-sight (LoS) radio channels may result in very low signal-to-interference-plus-noise ratios (SINRs). The authors in (Chiang et al., 2007) proposed to efficiently and reliably solve this kind
In recent years, Unmanned Aerial Vehicles (UAVs)have been used extensively in military and civilian fields, making the research on cellular-connected UAVs a popular topic forFifth Generation (5G) and beyond communications. In order to support the increasing amount of applications, it is essential to evaluate the performance of UAV communications. In this work, the end-to-end delay, packet success
Millimeter-Wave (mmWave) massive multiple-input multiple-output (MIMO) has been considered as a key enabler for the fifth-generation (5G) communications. It is essential to design and test mmWave 5G devices under various realisticscenarios since the radio propagation channels pose intrinsic limitations on the performance. This requires emulating realistic dynamic mmWave channels in a reproducible
Spatially-coupled serially concatenated codes (SC-SCCS) are a class of turbo-like codes constructed by interconnecting a sequence of SCCS using a set of block permutors. At short block lengths, however, the bit-error-rate (BER) performance of SC-SCCS constructed by independent block permutors exhibits a high error floor. In this paper, we propose an alternative method for constructing SC-SCCS to m
In platform software ecosystems, organizations partner and innovate together. Success and innovation depend on managing complex sets of business relationships and stakeholders and using a requirements-selection process. We describe the associated challenges and strategies from the study of two large proprietary platform ecosystems.
A high quality benchmark for small variants encompassing 88 to 90% of the reference genome has been developed for seven Genome in a Bottle (GIAB) reference samples. However a reliable benchmark for large indels and structural variants (SVs) is yet to be defined. In this study, we manually curated 1235 SVs which can ultimately be used to evaluate SV callers ortrain machine learning models. We devel
Local pseudorandom generators are a class of fundamental cryptographic primitives having very broad applications in theoretical cryptography. Following Couteau et al.’s work at ASIACRYPT 2018, this paper further studies the concrete security of one important class of local pseudorandom generators, i.e., Goldreich’s pseudorandom generators. Our first attack is of the guess-and
