Search results

Recently, we proposed a design framework to obtain efficient and uncorrelated MIMO antennas in mobile handsets for frequencies below 1 GHz. The main benefit of the approach is that it can give significantly larger bandwidths than existing techniques. Using the Theory of Characteristic Modes, it has been shown that slightly modification of the chassis can result in multiple orthogonal resonant mode

Designing multiple antennas in small terminals at frequency bands below 1 GHz is challenging due to severe mutual coupling among antenna elements. The severe coupling is often the result of simultaneous excitation of the fundamental characteristic mode of the terminal chassis by more than one antenna element. In this work, through the use of characteristic mode analysis, we propose to solve the co

Correlation coefficient, as a critical performance metric of multiple antenna systems, can be calculated from the 3D radiation patterns of the antennas for multipath environments with uniform 3D angular power spectrum. A simpler, faster and lower cost approach uses the antennas’ scattering parameters to determine correlation coefficient. However, the method assumes lossless antennas, and hence onl

Evaluation of Specific Absorption Rate (SAR) for multiple antenna systems is expected with the upcoming deployment of LTE Advanced, where multi-antennas are excited in both uplink and downlink. In this work, the influence of different antenna locations and antenna types was investigated for stand-alone SAR and simultaneous SAR, to provide some guidelines for antenna design in multi-antenna handset

In many application domains, critical systems must comply with safety standards. This involves gathering safety evidence in the form of artefacts such as safety analyses, system specifications, and testing results. These artefacts can evolve during a system's lifecycle, creating a need for impact analysis to guarantee that system safety and compliance are not jeopardised. Although extensive resear

Definition and reuse of robot instructions is still an art that requires extensive engineering, not only of the infrastructure but also of the adaptation of robot capabilities to the context and domain at hand. Technical approaches are numerous, but the lack of practical success is an indication of hidden difficulties, which we have experienced as complications over the last two decades. Based on

In this letter we apply the Generalized Method of Moments (GMM), widely used in econometrics, to receivers operating with imperfect channel state information (CSI) of singleinput-multiple-output (SIMO) block-fading channels where a single pilot symbol is used. The GMM results in the standard maximum ratio combining (MRC) receiver, but with an improved channel estimate. Although not our goal at the

Open Innovation (OI) has attracted scholarly interest from a wide range of disciplines since introduced by Chesbrough, i.e. ”a paradigm that assumes that firms can and should use external ideas as well as internal ideas, and internal and external paths to market, as they look to advance their technology”. However, OI remains unexplored for software engineering (SE), although widespread in practice

Optimal data detection of data transmitted over a linear channel can always be implemented through the Viterbi algorithm (VA). However, in many cases of interest the memory of the channel prohibits direct application of the VA. A popular and conceptually simple method in this case, studied since the early 1970s, is to first filter the received signal in order to shorten the memory of the channel,

A 2.8-to-5.8 GHz harmonic VCO designed in a 28 nm UTBB FD-SOI CMOS process adopts a reconfigurable active core to save power at the lower oscillation frequencies, and to enable a trade-off between power consumption and phase noise at all frequencies. Interference caused by the magnetic coupling to and from the VCO inductor is greatly attenuated by resorting to an inductor in the shape of an 8. Sim

A 2.8-to-5.8GHz VCO designed in a 28nm UTBB FD-SOI CMOS process adopts a reconfigurable active core to save power at the lower oscillation frequencies, and to enable a trade-off between power consumption and phase noise at all frequencies. The UTBB FD-SOI CMOS process is instrumental to achieve a tuning range in excess of one octave at low power consumption, while the use of an 8-shaped tank coil

A digital phase-locked loop (DPLL) which uses a high resolution 2-dimension gated-Vernier time-to-digital converter (TDC) is presented. The shaped Vernier quantization of TDC greatly improves the in-band phase noise. Also the 2-dimension structure makes DPLL be able to process large phase errors almost without the influence of latency time. Combined with a high figure-of-merit (FOM) class-D digita